Reply to thread

Message: <blockquote data-quote="95boss351" data-source="post: 856705" data-attributes="member: 11964">Watsup guys. just need some feedback on my engine build and hp and tq numbers it produced. I built a 91 351w bored .030 over. It has trickflow twisted wedge track heat heads tht were milled down .0025. I have flat top pistons with valve relief. Stage 2 trickflow cam(duration 292/290 lift .542/.563), professional products typhoon intake, 75mm tb and 76mm maf. 42 lb/hr injectors and 255lph fuel pump. 1-3/4 long tube headers. I have other lil bolt ons but you can see these are the essentials that would be looked at when it comes to the tuning. This is a very mild build for a 351 but this was a budget project. With 12 degrees of timing, it produced 310rwhp to the wheels and 326rwtq. Im very dissappointed with these numbers. I think the guy who tuned it was very conservative and was very timid when it came to tuning my car. i think the motor should have at least produced 350-360rwhp and nearly 400rwtq. Do u guys see anything wrong with my setup 2 produce only 310hp and 326tq? Also, I think if the timing was increased to 15 -17 degrees and a better intake i could see a better results.Any feedback?</blockquote>