Reply to thread

Message: <blockquote data-quote="Wmac" data-source="post: 1484332" data-attributes="member: 23045">Small but needed items. LMR has nearly everything, some items are costly. Reverse light pigtail .....LRS-8693nsm (not needed if you find a T5 harness) "C" clip for clutch cable ... check LMR  Shifter boot ................LRS-7277f (very nice leather boot) Trans to bell bolts ........ m12 x 1.75 x 40mm.... x 4of Bell to engine bolts....... 7/16 - 14 x 2" ..... x 6of                                     3/8 -16 x 1.5" ..... x 2of                                     5/16 - 18 x 3/4" .. x 2of There is an exhaust hangar plate between the trans mount and trans. The T5 plate is slightly different than the aode plate.  The are 4 bolts and tinnerman clips that bolt the shifter boot plate to the trans tunnel. Not sure of size, probably m6 x 25mm (approx) If you ever expect to run some times, you will probably need a driveshaft safety loop. Now would be the time to get one. I have a Lakewood. Very good piece.</blockquote>