Reply to thread

Message: <blockquote data-quote="voidfinger" data-source="post: 233938" data-attributes="member: 8925">I'm working on the 4v from the mark 8... i'm taking my time and doing it right... its going to be flat topped pistons so around 11 or so to 1 cr... then i'm doing cams, and some port work on the thing with a 5 angle valve job.... along with a 150 hp wet shot....With the 4v you could hit 350 hp rather easy... if you use cobra stuff... you have 305 flywheel hp to start with... good cam will give you some good power, electric water pump, porting and polishing, different stuff and yea you should be able to hit that.</blockquote>