Reply to thread

Message: <blockquote data-quote="bsn95w" data-source="post: 808129" data-attributes="member: 10835">since most of you may know, the engine knocks on my 00 gt. engine has fairly low compression, quite a bit of blow by under hard acceleration, and the valve seals in the heads are bad.i was planning on sticking a stock 5.4 in the car, but now that im looking for one, cant seem to find one... any idea as to what to do?i have about a 2k budget, and will be doing all of the work my self, so... that 2k basicly is all performance parts if i stick with a 4.6, or basicly all goes to a 5.4.right now, im concidering hi tech stage 2 cams, pypes long tubes, re-ring kit, barrings, and all nessicary gasgets... this set up has run 12.16 on a full bolt on car with 4.10s.... ill be happy with anything under 13.0 (14.0 if im honest haha.)anyways, looking for opinions, ideas, and advice.</blockquote>