Reply to thread

Message: <blockquote data-quote="RichV" data-source="post: 1179739" data-attributes="member: 17007"><img src="http://store.alternatorparts.com/ProductImages/21894FD1a.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />On the bottom image, the top terminal goes to the battery. Large gauge wire, constant 12v. The small terminal is your trigger, should only have 12v when the key is in the 'start' position. If you have both of those, problem has to be the starter (assuming grounds/battery are good). The lower large terminal is permanent into the starter motor, starter should engage if you put 12v on it without the trigger signal. I bet you just have a bad solenoid.</blockquote>