Reply to thread

Message: <blockquote data-quote="Choppylope" data-source="post: 1435334" data-attributes="member: 22486">Hello, this is my first post here, I apologize for any newbie questions when it comes to specific 94-95 info. About a year ago I picked up a half built 94 gt, drove it for a while and just assumed it needed a tune because it was half built when I obtained it.Mods ( that I know of ):Procomp upper and lower IMProcomp 3037 headsX303 camWideband 02Trick flow 45 degree elbowShorty headersWelded subframe connectorsSupposedly notched pistons1.6 roller rockersEverything else is stock. I had an issue where 2 pushrods broke and I limped her home to put her in the garage to start tearing it down. ( now that its getting closer to spring Id like to get it back on the road, it sat for 6 months ) What I found is that the stock pushrods where gapped and loose on the rockers like a mechanical cam and a massive amount of wear from the guide plates on all the other Pro's. I'm currently in the process of getting the correct pushrod measurements ( with a checker of course ) and I'm trying to figure out what would be the correct setup for the rest of the car while I have it torn down. It has the stock speed density setup, TB, injectors, fuel pump etc. I want to get the right upgrades to match with the heads and cam so that way I only have to get it tuned once ( I already have tweecer rt) now before you guys roast me for not searching, I've honestly spent what feels like a lifetime trying to gather any and all info surrounding how to get that cam to work well in our cars and how beefy of a fuel system/ injectors are needed. There's almost nothing out there for my setup:/. And then I also need to know if there is anyone around michigan that could help me get a base tune after everything is installed. ( I will learn how to tune, but a completely untuned computer is going to be a nightmare to learn on with this much done to my car, I'd love a good starting point that I can work with ) any help would be greatly appreciated in the direction to go to finish the build right. It's such a clusterf**k I don't even know where to start after I get the pushrods issue dealt with.And if it helps any, this will be more of a track car/ hitting the twisties.</blockquote>