Reply to thread

Message: <blockquote data-quote="Maniac95" data-source="post: 1185899" data-attributes="member: 16875"><p>Going to be putting a 306 in my 95. I am using a DSS main stud support and was going to go with the Moroso 20506 drain pan. Is anyone using the same mss and this pan or can you suggest a pan and pickup tube that will work. I want to use a 7qt pan that keeps the stock 7 1/2" depth. I know that because of the way our cluch cable enters the bellhousing that alot of the kicked out pans don't work. Using 7qt pan because of high volume oil pump and oil cooler. Also going to use the main stud support because my front main journal snapped on my last engine as well as my crank. That was with only a E303 and track heat top end kit. Going to be ordering parts like Tuesday or Wednesday so any input would be appreciated.</p></blockquote><p></p>