Reply to thread

Message: <blockquote data-quote="Purple97GT" data-source="post: 507690" data-attributes="member: 9882">Car to explain these further:7) Change the cam position sensor on NPI stangs so it won't interfere with your coil pack bracket on the drivers side. I'm not sure if it will need to be changed on PI stangs. NPI alternator bracket won't work, so you will need to order one that will fit. You will need a PI heater return line that runs under the intake to water pump since the Explorer line has an extra open end on its line. The cam sensor that came with the Explorer crate motor had the CPS connector pointed where you couldn't get the harness attached to it because the coil pack bracket. Just reuse or buy a new 97 GT CPS and you're good.You also won't have to deal with the stock explorer heater/coolant line because you just have a longblock. Just buy a PI intake/Coolant line and alternator bracket and you're good.</blockquote>