Reply to thread

Message: <blockquote data-quote="Dalamar" data-source="post: 197171" data-attributes="member: 8116">It's all about the powa Trey!actually I tried fitting up those one peice projectors I have, and they suck ass. don't fit quite right, and after messing with it, ALL of the clip things that snap in the hole - the tabs all broke off.  LAME, POS, another waste of time.So, I put my stockers back in for the time being.I really like the looks of it, but for quality - NOTHING fits up like a stock ford piece. whatever you get thant's not OEM will need fitment and rework.On this one, I had them rework the lower Lip edge on the side and smooth out around the fog light. if you look at the first pix in the body and paint thread, you'll see that the edge is promonant and wasn't exactly strait.  I also had to adjust and shim the mounting bracket... again, this isn't uncommon on the aftermarket stuff.  the quality of the urathane is good, it's the dense type and is thick. so that's good.so for style I'd give it a 9, for finish and quality i'd give it a 7.</blockquote>