Reply to thread

Message: <blockquote data-quote="Patientzero" data-source="post: 1456071" data-attributes="member: 22964">With the season coming to an end it was time to start thinking about what I needed to do for the offseason and getting ready for next year.  First on the agenda was getting my C10 pulled out of the basement to make room for the Mustang.  I'm not a fan of working outside, I'm soft.  [ATTACH=full]2713[/ATTACH] So much room for activities now![ATTACH=full]2711[/ATTACH] [ATTACH=full]2712[/ATTACH] I had to pull the bumper off the Mustang because the entrance ramp to the basement is so steep but I got it down there.[ATTACH=full]2715[/ATTACH] [ATTACH=full]2714[/ATTACH] I wanted to redo some things on the front of the car to help cut weight and so I could box in the radiator so to help with that I ordered a tubular bumper support from MAF Racing.[ATTACH=full]2719[/ATTACH] I was also never really happy with how flimsy the rear spoiler was.  The 3d printed brackets that it came with were nice but started to warp after being out in the sun and I had to constantly retighten them because the material would compress and they would loosen up again.  I make some new brackets out of aluminum that were better braced and also added a 3rd bracket in the middle of the trunk to get rid of the flex.  This setup is pretty dang solid.  With the car in neutral I could push it by the spoiler now.[ATTACH=full]2718[/ATTACH] [ATTACH=full]2717[/ATTACH] [ATTACH=full]2716[/ATTACH]</blockquote>