Reply to thread

Message: <blockquote data-quote="cobrajeff96" data-source="post: 1524619" data-attributes="member: 29141">Yea, that's the high pressure line going from pump to hydro.Over the years and different iterations of the hydroboost system (namely from 96-98 & 99-04) certain things changed, most notably the hydroboost itself while 95 and below were vacuum boosted so they don't apply.If for instance a 99+ hydroboost was installed the lines from a 96-98 donor are incompatible. Not saying that's the case with your situation, but just know that there are some incompatibilities. You'd have to snap a pic of the connection interface inside the power steering pump as well as the mating side of the line connecting to it to be sure that what you will have actually works. And usually on the high pressure interface there is a PTFE or "Teflon" seal to stop  the leaks, and a lot of people also apply thread sealant to that connection just to be sure.</blockquote>