Reply to thread

Message: <blockquote data-quote="eliyarbrough" data-source="post: 844096" data-attributes="member: 9128">Crap! I found what needed to be done when I bought a new-to-me one. Let me try & re-find it. Remember that all other fobs have to be present when programming.1. Cycle the ign from off to on 8 times ending in the on position.At this point your locks will cycle ( they will lock and then unlock )2. Press and hold the lock and unlock buttons at the same time on the 1st remote you want to program.The locks will cycle ( they will lock and then unlock ) letting you know that it wasaccepted.3. Now quickly press and hold at the same time the lock and unlock buttons on the second remote.Again the locks will cycle letting you know it was accepted.4. Shut the ignition off now and the locks will cycle one last time. Hope that's it! If not, I'll hunt again for it.</blockquote>