Reply to thread

Message: <blockquote data-quote="Haymore1965" data-source="post: 1517146" data-attributes="member: 29761">Hello all, 96 GT, swapped out the ugly and PITA single piece headlight for original style dual piece headlights with some Amazon projectors and 22k lumen LED bulbs. Finally got around to installing them this evening and got everything adjusted (eyeballed it for now) and working. For the most part that is. Issue I’m having is, when I pull to flash my high beams, they work, flash as they should. However, the issue I’m having is when I push the lever forward to activate the HB’s, the lights cut off…I have yet to do some diagnosing with my multimeter/test light and check fuses (it’s late and I’m tired). To my knowledge, I have wired everything up correctly, reason being is that the brights technically work, just not with the lever in the forward position. That’s my help I need. Any input is appreciated. Pictured below is on LB,HB (pulled) and you can see what happens with the blacked out photo when I push the lever forward.</blockquote>