Reply to thread

Message: <blockquote data-quote="mustangspartan" data-source="post: 925133" data-attributes="member: 9864"><p>Lots of pictures to add but update is everything has been torn completely down now.. Pulled the pan and number 1 rod cap and didnt like the little bit of wear so i polished her up and grabbed new bearings. Block is now honed and freeze plugs and cam bearings out.. Tue going to put it in the hot tank and wash it up then start assembley.  Have the trans apart also looked at the third gear and didnt like the amount of wear on the slider teeth so i called astro perfromance and picked up a new one also picked up cluster gear support..  <a href="http://www.astroperformance.com/product_info.php/manufacturers_id/29/products_id/301" target="_blank">http://www.astroperformance.com/product_info.php/manufacturers_id/29/products_id/301</a>  Now lets just hope since everything has been completely done and looked at ill be good for a few yrs.. Not to say im not going to upgrade a few more things like a msd ignition and things like that but the main stuff will be done.. Also car is now done at the body shop. Door was fixed and fresh paint on the rockers and front bummper with a nice 3000 grit wet sand and buff job. Looking new.</p></blockquote><p></p>