Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1560408" data-attributes="member: 11896">look inside the hole where the radio use to be and clipped to the passenger side there should be a black 8 pin harness that looks similar to the grey one shown.  It will be clipped into a harness, disconnect it and pull the male portion of the harness and if you want easy you go get a metra 70-1770 standard ford harness from your local audio shop or maybe autoparts store(or order) and the wire colors will be the same as the deck.  If you want to save a few bucks you can cut the other end of the harness off 6" past the harness and use it for the wiring as you will not be using that harness anymore when we bypass it.  If you want the cheap option let me know and I will let you know how to figure out which wires go to what speaker.Now the 2nd part of this will be to go to each speaker and when you replace them, you will use the speaker wires that go to the tweeters as your signal rather than the one that goes to the woofer.  That harness I had you find goes directly from there, to each tweeter so by using it you have now bypassed the amps.</blockquote>