Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1026845" data-attributes="member: 11896">got the wiring pretty well done now, only part left is for the display which is a single wire.  I installed a small Phoenix Gold dist block next to the valves to make it easier/cleaner to split power/ground to all the componants.  Cable clamps are used to hold all the wires down and out of the way so that they will get pinched and they will also be used for the hoses when they are ran.  Not sure yet if they will go down/out under the drivers seat or under the tank, need to see how crowded it is under the car when the subframe connectors are installed around the side exhaust.<img src="http://carphotos2.cardomain.com/images/0015/89/24/15869842_large.jpg?modal" alt="" class="fr-fic fr-dii fr-draggable " style="" />With the seat all the down and back there is still just enough room to run the hoses. <img src="http://carphotos.cardomain.com/images/0015/89/14/15869841_large.jpg?modal" alt="" class="fr-fic fr-dii fr-draggable " style="" />Gonna take a little break and then go take down the headliner to see about installing the overhead.   Hopefully that will not be too big of a deal.</blockquote>