Reply to thread

Message: <blockquote data-quote="Mustanger" data-source="post: 712991" data-attributes="member: 8886">Plus if you also have a relay you have compounded the complexity & the possibilities for making a mistake! I'm sure you will NEED the relay for this load...but you will now have to understand what the relay contacts are either Normally Open or Normally Closed.... plus which are the coil wires! Be patient & don't get upset, it is not as bad as it may sound. Test & see if you have power going INTO your pushbutton then is it going out from the pushbutton when it is pressed? Be sure the ground is really making good contact too. if that is cool then it is not getting to/through the relay to the starter. Go test WHEN you can! then get back to us...not much help possible until we get more data. Good luck</blockquote>