Reply to thread

Message: <blockquote data-quote="cobrajeff96" data-source="post: 1578792" data-attributes="member: 29141">Take it from me:  try to find a way to utilize the OEM bracketry. Most aftermarket seat mounts/slider mechanisms are thing gauge steel and if you're a large American, they will break inside of a month.In my experience you can either get a set of fixed mounts from Planted.Or you can custom make some adapter material like I did because my aftermarkets were also a bit wider (pics attached). These adapters I cut and drilled were initially on a power setup but I've since went manual because I don't ever change height (always at the lowest height) and it does actually save quite a bit of weight.</blockquote>