Reply to thread

Message: <blockquote data-quote="CobraRGuy" data-source="post: 1572519" data-attributes="member: 24211">Hi everyone,I purchased a set of '96 3-lens turn signals so I could implement sequential turn signals (I think they're way cool). I was fortunate to find a set in white in perfect condition. I then found a sequential wiring harness for SN95s. Everything wired up fine, but the signals flash way too fast. What I need is an adjustable relay. Unfortunately all of the 5-pin adjustable relays I've found are designed to use with LED bulbs. All of the regular ones I've found are 3-pin, which I don't believe will work.I am not familiar with using LED bulbs in turn signals. I wouldn't mind buying LED bulbs, but I don't know if they'll work with the sequential wiring logic. At this point I'll probably just buy LED bulbs and an LED 5-pin adjustable relay and see if it works.Here are my questions:1) Does anyone know if a 3-pin relay will work?2) Has anyone used a sequential wiring harness with LED bulbs?3) Is anyone aware of a 5-pin adjustable relay that is designed to work with incandescent bulbs?Thanks, CobraRGuy</blockquote>