Reply to thread

Message: <blockquote data-quote="1FastGT" data-source="post: 204085" data-attributes="member: 9656">im going to say the distributor, theres a sensor called the hall effect sensor, which operates as a Crank and Camshaft sensor in one. when the motor gets to operating temp and starts to ping/backfire or shut off. and will not start for a long time. thats the sensor. your better off going to bennet, autozone and getting a remanufactured one for like 120 bucks. or just upgrade to a msd for like 350. its up to you. just replace the whole distributor when you take apart the distributor to replace the sensor, the bearings inside will not seat right again and the shaft will wobble and not operate properly.CCRM.The CCRM (Constant Control relay Module)CCRM interfaces with the PCM (Power Control Module) to control the cooling fans, a/c clutch and fuel pump operation. The CCRM also incorporates electronic engine control power relay to supply power to the EEC-IV system.</blockquote>