Reply to thread

Message: <blockquote data-quote="CC&#039;S95GT" data-source="post: 1238058" data-attributes="member: 10547">I've had the same issues with mine too. I believe it's an issue with the cluster itself. Mine works better now but sometimes still indicates incorrectly at both the tach and speedo but not usually both at the same time. It does work better after the cluster has warmed up. Usually a tap or 2 on the face will set all the needles properly.I pulled the cluster out and slid a couple pieces of paper behind the area where the circuit board folds over where the harnesses clip in. This tightens to connection the harness is making to the PCB and that seems to make it much better although didn't fix it perminately.</blockquote>