Reply to thread

Message: <blockquote data-quote="RC51TMAXX" data-source="post: 636543" data-attributes="member: 11891"><p>ok so i work the car for a little bit today and check the TPS voltage and it was reading .90 i know thats it suppose to be like .97....i had set the idle screw just like bbk says to and thats reads the .90...i adjusted the idle screw until the tps read .97 is this the correct way of doing this or is my tps f****ed. my rpms are running bout 800 to 900 and idle surge is very little to none after the tps is set to .97 is this right also i would like the rpms a little lower but i get idle surge</p></blockquote><p></p>