Reply to thread

Message: <blockquote data-quote="blackpony" data-source="post: 710277" data-attributes="member: 11122"><p>ok so i just installed a mm panhard bar... i was running granatelli lowers with poly bushings and hpm uppers with poly bushings in the arms and stock rubber bushings in the rear housing... after i installed the phn, i removed the driver side upper arm creating the pm3l... now my issue is, the actual phb that goes across the rear, hits the sway bar... i tried to slightly bend the sway bar up using a jack, and that helped out a little, but am still having issues with them hitting each other.. has anyone had this problem? if i were to unbolt the sway bar, and waller out the rear bolt hole on the lca so that the arm can move up slightly, would this hurt anything? oh and i am running the stock sway bar from my 95 gt...</p></blockquote><p></p>