Reply to thread

Message: <blockquote data-quote="weendoggy" data-source="post: 1587463" data-attributes="member: 23340"><p>Yeah, what he said. To remove, the "swivel" nut is on the bottom under that hex/tube area. The swivel is between the nut and the hex portion. Along with the nuts, remove it all, or, loosen as mentioned and swivel out of the way a bit. I'd disconnect the sensor and/or remove it so you have some room and not damage it. Oh, the nut(s) holding the heater tube also are part of the intake manifold bolt. So, if the whole thing turns....be careful. Sometimes they get rust/welded so you may want to take an open end wrench and try to hold the manifold nut under the tab if you think that'll happen. jmo</p></blockquote><p></p>