Reply to thread

Message: <blockquote data-quote="sn95gtvert" data-source="post: 706903" data-attributes="member: 11975">you can pull your switch panel off from you drivers door. then you can remove the switches from the plastic bezel. i think its 2 screws. once they are free you can pull out the switch for said window and jump the ports with a wire. i dont know witch ones are up/down power/ground but you can work that out by testing it with a probe find a hot side and a cold side see what happens once jumped.if the motor operates you know its good and the switch is bad. if it doesnt then pull the 1/4 panel off and check the motor. and if there is no power at the switch anywhere then you have a fuse/wiring problem.</blockquote>