Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1210257" data-attributes="member: 11896">that should be easy enough to check with a meter to see if its got enough power.  Grounds are not something you can visually look at to check if they are good/bad unless the wires are just so visably corroded that its obvious.  So if you do want to check the grounds first just grab and see if moves at all(should not move ANY).  If it is tight go ahead and remove it, clean the areas of contact with some sand paper and then tighten them back up.  other then a bad ground I am not sure how the ECU would loose enough voltage to cause problems and if the ECU was not getting enough power or had a bad ground I would have to think that it would probably throw more then one code.  How old is your fuel pump?  Can you or did you check your fuel pressure?</blockquote>