Reply to thread

Message: <blockquote data-quote="5.0kid" data-source="post: 581607" data-attributes="member: 10487">stock block, cleaned and bored 30 over and honed. also had a line honing done to the main caps and all the plugs replaced.then, it had an eagle/keith black 347 rotating assembly put in, balanced by eagle, and I have the serial number and balance numbers on a card also. It also came with a new balancer and flexplate (i have a manual, so i'll be still using my flywheel). kit included eagle cast crank, forged i beam rods, and hyperteutetic pistons which should be around 10.2 compression ratio with the ported windsor sr heads.here are some pics of whats going on the engine. I'll be using ported windsor senior, a ported typhoon intake, and a trickflow stage 1 cam with 1.7 rockers (i really liked that cam when i had it in my 302, and i will change it out later down the road for a custom one).sorry again, i need to get something other than cardomain, these pics are huge.<img src="http://memimage.cardomain.com/ride_images/3/2254/4901/30634950027_large.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://memimage.cardomain.com/ride_images/3/2254/4901/30634950026_large.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://memimage.cardomain.com/ride_images/3/2254/4901/30634950025_large.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://memimage.cardomain.com/ride_images/3/2254/4901/30634950024_large.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>