Reply to thread

Message: <blockquote data-quote="Javi" data-source="post: 233506" data-attributes="member: 9866">A few weeks ago my driver side window wont go down without me pushing it,same thing to go up,but i was able to heard the motor running and a clicking noise so i decided to take the window motor out and surprise the bushing were worn out,so i went to the parts store and bought the bushings and got it fixed now it works like new up and down.now im goign to tell you how and what you need:Tools needed:*Bushing can be found at autozone,O'Reillys or Advance auto parts for about $6.99Part No. is 74410 specs of bushings are :Diameter:.595"Height:.429"*Phillips*5/16 socket *Flat scredriver<img src="http://inlinethumb01.webshots.com/32000/2825260110102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://inlinethumb46.webshots.com/28525/2576814220102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Step 1: ok first thing open the door (of course)Step 2: now see the black part that you use to shut the door that needs to come off,on the top of it stick the flat screwdriver       and pop it loose,once that is done puul it straight up, on the back of it there is the power mirror switch unplug it, then             unscrew  the two screws to free the lock/unlock harness<img src="http://inlinethumb43.webshots.com/28970/2410101120102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Step 3: Take off the two screws that are near the center of the door panel.Step 4:Now pull the panel door up and then feed the door opening handle thru the door panel.now the door panel is offStep 5:the window operator i s east of the door,peel back the plastic as necessary to get to it,then unplug it,now fish it thru the       little hole<img src="http://inlinethumb31.webshots.com/29662/2999199660102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Step 6:Take the speaker off it has 4 screws <img src="http://inlinethumb63.webshots.com/28798/2798354020102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Step 7:now peel back the plastic as necessary to get to the 3 bolts holding the motor <img src="http://inlinethumb09.webshots.com/32072/2917872640102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://inlinethumb09.webshots.com/29640/2939117150102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Step 8:takes off the three bolts holding the motor,make sure you are ready to catch it or will fall inside the door (no biggie),get it       out thru the speaker hole.Step 9<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite9" alt=":eek:" title="Eek!    :eek:" loading="lazy" data-shortname=":eek:" />pen the motor by uncrimping the two crimps and pop the cover off surprise !!!!!!all that stuff is not garlic is whats left of       your bushing,at the end of the shaft there is a clip,spread its ears and slide the clip right off (pics no.1)<img src="http://inlinethumb02.webshots.com/32001/2867095100102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://inlinethumb20.webshots.com/29267/2732934250102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://inlinethumb39.webshots.com/31782/2050779440102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://inlinethumb55.webshots.com/31350/2967935220102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Step 10: pull the gears out and clean the inside <img src="http://inlinethumb52.webshots.com/31219/2192631250102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Step 11<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite7" alt=":p" title="Stick Out Tongue    :p" loading="lazy" data-shortname=":p" />ut your new bushings in <img src="http://inlinethumb01.webshots.com/32000/2825260110102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://inlinethumb25.webshots.com/29912/2737505900102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://inlinethumb51.webshots.com/31794/2622723340102188418S425x425Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />reassemble everything and you are doneI hope this helps everyone as it helped me.NOTE: Passenger is almost same thing</blockquote>