Reply to thread

Message: <blockquote data-quote="Simple Six" data-source="post: 1552918" data-attributes="member: 30662">Appreciate the advice, the crimps are temporary so I could get the exact length on the wire for each sensor to do that I had to undo the insulation on the harness and the fuel injector connectors I’m  going to buy new fuel injector connectors. The wires zip tied on the cowl again temporary to get exact length on all wires.It’s a bit of waste of crimp zip ties and wire to get exactly everything correct but ounce every thing is routed to exact length I’ll remove the main harness and solder and insulate the connections on my work bench rather than solder all connections in the engine bay of the car where it would be more difficult.</blockquote>