greenscobie86
Well-Known Member
Hello All,
If this question has been asked before I apologize.
Here is my dilemma, I have H&R SS springs on my car with stock C/C plates. I have recently added camber bolts in hopes of possibly fixing my negative camber problem... Unfortunately this was not to be so now I am shopping for some camber/caster plates.
I realize that MM ones are probably the best and I should just go with them. However I am on a a pretty tight budget with my upcoming PI cam swap so I would also like to enterntain the possibility of going with other manufacturers.
Are the MAC plates good? They are the 3 bolt setup with poly bushings, a decent choice since I wont be running coilovers and dont really need to drill the extra bolt.
Also I can get some used Steeda plates. These are supposedly very good units and offer alot of adjustability. Worth it?
Finally will my stock strut bar clear any or every C/C plate I choose to buy? First hand experience would be great here.
Thank you, and here is a pic of my car from last weekend.
If this question has been asked before I apologize.
Here is my dilemma, I have H&R SS springs on my car with stock C/C plates. I have recently added camber bolts in hopes of possibly fixing my negative camber problem... Unfortunately this was not to be so now I am shopping for some camber/caster plates.
I realize that MM ones are probably the best and I should just go with them. However I am on a a pretty tight budget with my upcoming PI cam swap so I would also like to enterntain the possibility of going with other manufacturers.
Are the MAC plates good? They are the 3 bolt setup with poly bushings, a decent choice since I wont be running coilovers and dont really need to drill the extra bolt.
Also I can get some used Steeda plates. These are supposedly very good units and offer alot of adjustability. Worth it?
Finally will my stock strut bar clear any or every C/C plate I choose to buy? First hand experience would be great here.
Thank you, and here is a pic of my car from last weekend.