SN95_Project
New Member
- Joined
- Nov 27, 2021
- Messages
- 50
- Reaction score
- 18
Can someone point me (or show pics from their car) to a wiring diagram for the ABS sensors? My son and I are finally working on the suspension kit we bought from MM and when we were working on coilovers we noticed that the ABS sensors weren't there. If they didn't chop the harness, we're going to go ahead and replace them. Any idea on why someone would do that (other than to save a couple bucks)?
Also, I thought I needed a new rack and pinion, but after looking at it, I'm not 100% sure (I'm good at replacing - not so much with diagnosing). I am attaching a pic below. It looks much "dryer" on the passneger side than on the right. Could it just be oil or something leaking down onto the rack? I mean, it IS a 27 yr old car. Something is gonna leak... I think that's the oil filter over the top of it. It IS a little low on PS fluid. Just didn't want to tear it off for no reason as I've heard so much bad about remanufactured racks and that's all I can find.
Thank you!
Also, I thought I needed a new rack and pinion, but after looking at it, I'm not 100% sure (I'm good at replacing - not so much with diagnosing). I am attaching a pic below. It looks much "dryer" on the passneger side than on the right. Could it just be oil or something leaking down onto the rack? I mean, it IS a 27 yr old car. Something is gonna leak... I think that's the oil filter over the top of it. It IS a little low on PS fluid. Just didn't want to tear it off for no reason as I've heard so much bad about remanufactured racks and that's all I can find.
Thank you!
Last edited: