cut stock spring

[monster]

Thinking of cutting a v6 or gt spring instead of my cobra ones don't know if they are any different?
Would this work?

 

[MustangChris]

dont *think* they are different.

 

[monster]

What I needed to know thanks

 

[monster]

If I just cut 1-1.25 coil could I get away with just the camber bolts?

 

[monster]

About to do this wish me luck.... if I just cut 1-1.25 coil off will camber bolts help
Also what kind of struts should I go with

 

[monster]

I was about to start the project and got a text referring to a c list post about some mufflers

He had steeda lowering springs with 555 8200 on them

I traded flowmaster 44 cat back for them worth it?

What are these springs will they work for my car thanks

I was about to start the project and got a text referring to a c list post about some mufflers

He had steeda lowering springs with 555 8200 on them

I traded flowmaster 44 cat back for them worth it?

What are these springs will they work for my car thanks

 

[monster]

http://postimage.org/image/kvnrkv3qf/2e6e8a71/
Hears pic after lowered

http://postimage.org/image/bkkl1hkx3/c6c2a549/

Before
http://postimage.org/image/5bdwdbobl/b219b901/

Before
http://postimage.org/image/5bdwdbobl/b219b901/

 

[CC'S95GT]

looks good but only 1 link works.

 

[monster]

http://postimage.org/image/5bdwdbobl/b219b901/

Before

http://postimage.org/image/5ulds0ggr/9a9ac0e9/

After

http://postimage.org/image/5ulds0ggr/9a9ac0e9/

Idk why but I think I got 1 before and 1 after link that works

 

[Tony]

About to do this wish me luck.... if I just cut 1-1.25 coil off will camber bolts help
Also what kind of struts should I go with

i myself cut 1 coil and did'nt even notice any neg. camber, lol. so i'd say yea. camber bolt will be fine.

 

[Ferocious]

Looks much better than before. The rear wheels need spacers though.

 

[Jnicho]

Looks much better than before. The rear wheels need spacers though.

My thoughts exactly...some 1.25" spacers will "toughen" it up.

 

[monster]

What do I do about the lip on back if I bottom out it will tear so in up

 

[Walking Tall]

Looks good! I'm going to try and cut mine this weekend.

 

[Jnicho]

Got your links to work for ya.

Oh...don't think you have to worry about rubbing the rear fender. I'm lower than you I think and with a 1.25" spacer on a 17"x8" wheel and a 275 tire I have no issues.

 

[Tony]

What do I do about the lip on back if I bottom out it will tear so in up

lots of ways to get rid of the lip. google rolling fender lip. eastwood tool does a good job. air saw and some masking tape, followed with some sanding to smooth the sharp edges.

 

[Walking Tall]

Before. Stock height:

After. 1.5 coils in the front, 1 on the rear will all isos:

 

[monster]

Looks great way better than the 4x4 look.. I got steeds sport springs on mine and I think you are lower

http://postimage.org/image/wsujke33h/