RAU03MACH
Legend
Had some like that
How about the one you cant even start a bolt by hand
No room for fingers either
No room for a socket
How about the one you cant even start a bolt by hand
No room for fingers either
No room for a socket
Sounds like one on my passenger on3 FF header. It's a factory stud cut short on the part that sticks out of the block as well as the part that goes into it. You install the stud from the flange side through to the nut and tighten it. And the primary holds the stud and nut from falling out.. then you hold the header up with one hand and get this now "bolt started" using an open end wrench doing an 8th turn at a time through the mls gasket. And it happens to be the lower nut 3rd from front.. basically behind the motor mount. Got it down to a science now. Can get the header in in 20 min. LolHad some like that
How about the one you cant even start a bolt by hand
No room for fingers either
No room for a socket
That sounds like one wild ass car, any pics of itHad some like that on my 460 interceptor with long tube in a 92 lx gt coverted mustang
It sucked