Boosted_97Cobra
New Member
- Joined
- Nov 1, 2021
- Messages
- 7
- Reaction score
- 6
So currently I have a 1997 cobra forged internals. Innercooler, imrc delete, adjustable fuel regulator, 47 psi injectors, 255 warlboro fuel pump. 3.0 inch pulley on a 6 rib belt. My seal is going on the shaft and causing oil to seep out and I’ve gone through several belts,
im going to send out to vortech to fully upgrade it, my question is they told me that if I upgrade the internal fins, with the SI trim, It will be capable of 27 psi,
will I need to go with bigger injectors?
also what’s the best way to eliminate belt shredding besides checking and making sure alignment on all pulleys are good?
im going to send out to vortech to fully upgrade it, my question is they told me that if I upgrade the internal fins, with the SI trim, It will be capable of 27 psi,
will I need to go with bigger injectors?
also what’s the best way to eliminate belt shredding besides checking and making sure alignment on all pulleys are good?