Reply to thread

Message: <blockquote data-quote="duh09" data-source="post: 1576458" data-attributes="member: 10558">[ATTACH=full]45603[/ATTACH]Parts came back from powder coating a week or so ago- finally took the time to sand down the letters. It’s been miserably hot in the shop so go out there about 6am and by 8am, I’m done with that. Been busy tinkering on the other shitboxes and trying to get the Cutlass sold. Hoping to turn that car loose and throw some money at shiney new hardware. I realized the tube between the blower and the intake is a hacked up Foxbody unit. Going to get a buddy of mine to give me a hand drawing up and attempting to 3D print a new one that will fit appropriately and give me a mount for a blow off valve instead of the nipple for the bypass valve. Vortech offers something like this for the Foxbody that’s aluminum that they call their Race Discharge tube, if they ever made one for a 94/95, I can’t find one so going the homemade route. I figure we can print a lot of them before we get to the $200 replacement price for the standard one for a 94/95.</blockquote>