Well I was refereed to Matt by Marco "Rustybumper" because he needed some correction work done to his new 2011 Mustang 5.0. What had happened was the dealership tried to remove a scratch on the spoiler but instead instilled some more deep ones of there own. There was also a small area on the tip of hood that needed some correction. It was not a big job but it was fun. I had an issue doing it on Tuesday outside using the sun light and we both though it was completely corrected but to my surprise it wasn't and was very embarrassed when he let me know yesterday. Yet, Matt gave me a second chance. Well lesson learned, I will always stick to doing correction work inside with my 1000 watt halogens to ensure correction is done correctly. This was the first time that had ever had happened to me so I am will make sure it never happens again.
Products and tools used:
Poorboys Waterless Wash.
Mothers Clay bar (sent to me to sample from Jim @ Mothers)
IPA around 45 to 50%
DI Plush Double sided Mirocffibers
CG Monster Microfibers
Yellow foam hand applicator pad
PC 7424XP
Craftsman 1000 Watt halogens
3M blue Painters tape
Meguiars M105
Mothers Professional Machine Glaze 82332 (sent to me to sample from Jim @ Mothers)
Meguiars M205
Menzerna 85RD
LC CCS 5.5" Orange
LC CCS 5.5" Blue
Duragloss 105 (sample from JL @ DB)
Well Matt was kind to post a thread up for me here. http://www.detailingbliss.com/forum/detailers-acclaimed-association/21366-danny-el-paso-tx.htm
Sorry for the low quality photos I tried to capture the defect but didn't have great luck I need to get a new camera. But they were removed which is what matters. I added some more higher quality pics Matt took, not of the correction but the 5.0 itself.
Products and tools used:
Poorboys Waterless Wash.
Mothers Clay bar (sent to me to sample from Jim @ Mothers)
IPA around 45 to 50%
DI Plush Double sided Mirocffibers
CG Monster Microfibers
Yellow foam hand applicator pad
PC 7424XP
Craftsman 1000 Watt halogens
3M blue Painters tape
Meguiars M105
Mothers Professional Machine Glaze 82332 (sent to me to sample from Jim @ Mothers)
Meguiars M205
Menzerna 85RD
LC CCS 5.5" Orange
LC CCS 5.5" Blue
Duragloss 105 (sample from JL @ DB)
Well Matt was kind to post a thread up for me here. http://www.detailingbliss.com/forum/detailers-acclaimed-association/21366-danny-el-paso-tx.htm
Sorry for the low quality photos I tried to capture the defect but didn't have great luck I need to get a new camera. But they were removed which is what matters. I added some more higher quality pics Matt took, not of the correction but the 5.0 itself.