Reply to thread

Message: <blockquote data-quote="glittle75" data-source="post: 493530" data-attributes="member: 8675">i have my PI swap ready to go as of today, I have PI heads, Comp 274's, PI intake, UD pulleys, Longtubes with matching X, and all the little stuff as well (ARP studs, Stage 8 header bolts, Lokar Dipstick....etc) i have been putting this all together for about 8 months now, and have gotten evrything at great prices. More to the point, I got my heads with valves installed with Comp beehive springs, and the cams seperate. Now, i have 2002 PI heads (Romeo) and they have the cam "girdles", can anyone point me to a Removal and installation guide for the followers, lash adjusters, and such. because like i said, the cams are out of the heads right now, and all thats in the heads are valves, springs, retainers, etc..also, i have a Aluminum cross-over intake right now on my car, and the intake i got with the heads has a plastic x-over. can i use it? how? and would it be best for me to just pick up an aluminum one? last thing, I have the cam card with the 274's, if i use the info on the card, can i install them without degree'ing them? or should i not worry about what the card says and degree them anyways? sorry for so many questions, but im trying to get all this done in a 3-4 day weekend period, and trying to avoid hiccups along the way. thanks</blockquote>