i know this is 94-95 specific 5.0 but it’s the pushrod section so I figured I’d ask here. Delete if not okay... anyhow I replaced the head gasket on my uncles 1989 Ford F-150 with the 351w, torque the head to spec and in the right sequence. However I’m not really familiar with these style rockers, the only ones I’ve ever messed with were on my camaro and those were easy. They are the stock ones which are pedestal mount if I’m correct. I will post a picture below. I did some research and from what I read and watched it said to torque to 20-25ft lbs, I attempted to torque the first one down and the bolt snapped..... I removed it and left it there. So what did I do wrong here?