600 hp(sae) 3.8l mustang

[shine1stang]

yup thats right, all tuned with methanol injection. Made roughly 500hp b4 the methanol, and 601 while spraying! This is with the 61mm turbo at 20psi. According to my research this is the only 3.8l mustang to make 600hp. All through a c4 auto.
SANY1132.AVI
im not sure how to attach files on this forum so here a link here some are, if you care to look.
http://www.allfordmustangs.com/forums/v6-talk/224854-600-sae-hp-3-8l-v6-mustang.html

 

[shine1stang]

notice how the power drops off pretty bad? The turbo isnt supplying enuff air. Its being over worked
my calculations:
@4k and 2.36pr gives me at boost 46.6 lbs per min
@5k and 2.36 pr gives me at boost 58 lbs per min

http://mysite.verizon.net/res1elpe/GT35Rmap.jpg

@4k shes sitting right in the middle of the eff range, but at 5k its working hard to keep the air supply and 6k w 69lbs/min and a pr of 2.36! HA forget it! time to go bigger

 

[NERD]

tick tick tick............

 

[shine1stang]

tick tick tick............

u referring to the motor? or the turbo taking the motor out?
This motor owes me nothing, ive been pushing it for almost 3 years now. Im not afraid to push it, as its held up thus far.

 

[IceMan]

Keep it up man... Good numbers...

 

[cnryYell0gt]

lmao. lots of people have made well over 600 on the 3.8.

and his internals may go if they are stock. but the block won't go.

 

[Jrgunn5150]

So what if it does blow? Another stock 3.8=300 bucks. All forged stuff=2000+ and add in machining for another 500 or so... You can blow alot of stock 3.8's before it's worth it.

 

[shine1stang]

lmao. lots of people have made well over 600 on the 3.8.

and his internals may go if they are stock. but the block won't go.

im talking about a 3.8l displacement motor. Not just the block. I know several have done it on the 4.2l stroker motors. The internals are not stock.

 

[cnryYell0gt]

lmao. lots of people have made well over 600 on the 3.8.

and his internals may go if they are stock. but the block won't go.

im talking about a 3.8l displacement motor. Not just the block. I know several have done it on the 4.2l stroker motors. The internals are not stock.

i stand corrected, matts is a 4.2. Good job either way though :icon_salut:

 

[Slykin]

Either way.. 600hp is a sexy number.

 

[cnryYell0gt]

Either way.. 600hp is a sexy number.

oh definently i'm going to be happy when i hit 400