Reply to thread

Message: <blockquote data-quote="g36 monkey" data-source="post: 1161273" data-attributes="member: 10997">check out sixstanger00's thread.  he found the rods you need for their long rod kit on summit, then you buy a crank from SSM made by scat, then you get pistons ordered after you have the machine work done.  motors from the junk yard would be cheap.  then you just order a cam, either from ssm or just get an off the shelf comp cam.the expensive part is heads, I paid 1000 for heads.  but you could get the ones off the motor you bought (in this example) ported at a machine shop.  as well as both intakes.boom, good for about 220 horse.  but add boost and you can stack some power out of it.</blockquote>