Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1490819" data-attributes="member: 11896"><p>don't go as far as unplugging at first, just try tapping on them with the back of a screwdriver and then grab and wiggle/jiggle/pull on each harness and see if it studders at all.  I have been discovering that the original harnesses on my car have started to have a bad grip on the sensors and it would cause problems especially after the car was hot and everything expanded.  You should be able to give a pretty solid pull on each harness and they should not disconnect or even come loose.  IF there are any that have 2 clips that are holding it on and one clip is broke, replace it.</p></blockquote><p></p>