Reply to thread

Message: <blockquote data-quote="screamin5oh" data-source="post: 953909" data-attributes="member: 16564"><p>no you dont need that, if you plug the line you will need to vent the cap i just drilled a few holes in the cap to make sure it vents, but i do not think that will cause running issues unless its sucking raw fuel or moisture in, just cap off the intake and plug that line off, if you want to take it completly off you will have to remove the inner fender wall and unbolt it all but it still will have a line coming from the tank so either plug it and vent your cap or leave it hang so it vents, put new plugs and wires on the car, new cap and rotor, throw some fresh 93 octain and bump the timming to 12 degree's</p></blockquote><p></p>