Reply to thread

Message: <blockquote data-quote="Willis_98GT" data-source="post: 720573" data-attributes="member: 9646"><p>ok so i have a 4channel that runs all the speakers and i have a 2channel for my sub, i rewired the 460 a while back when i put a better deck in long story short. and this configuration has been in existance for two years now and going.. what i did was get new interior. (black cobra leather yumm) anyways i disconnected everything just so i could pull the rear seat brackets out and whatnot just to exchange the interiors. but when i went back to install the amps everything came on fine, then i turned it off one more time and now the 4channel will come on but the 2 channel wont. or opposites, and if i pull the ground off the 2channel the 4channel will run fine, but if i go to ground the 2channel while the 4channel is on both amps cut off, ive tried multiple grounds and everywhere seems to do it.. im very confused because i am very good with this kinda stuff, yet completely sumped..</p></blockquote><p></p>