Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1454446" data-attributes="member: 11896"><p>which side of the harness did you test?  The side that is attached to the abs or the side on the body harness?  I ask because if you tested before the harness there is still the chance of a bad connection in the harness.  I don't think it needs to have 0v all the time but if it flickers it can still give the code, and a bad harness connection can do this.  If you can, test on the abs side and then get a little rough with the harness to see if you can make it flicker.  Push/pull, twist/turn and don't be afraid to give a good pull.  If the connection fails easily then there was probably a problem.</p></blockquote><p></p>