Reply to thread

Message: <blockquote data-quote="Slice" data-source="post: 1543784" data-attributes="member: 30002"><p>I did the convertible top myself on a new Edge. I think most of the companies in the USA that are advertising these tops are actually one company that spot up the other competitors. No matter, the tops were of good quality. If you're going to do it yourself or if a shop is going to do it ask them if they are using stainless steel staples. Those are must. Also I found the factory Staples are shorter than one quarter inch and if you use quarter inch staples you will see the spine of them pressing against the top once it's in. I don't know where the hell you get Staples shorter than that but if they're going to use quarter inch they're going to have to hammer them down so you don't see them trying to press against the top.</p></blockquote><p></p>