Reply to thread

Message: <blockquote data-quote="from6to8" data-source="post: 1574683" data-attributes="member: 17413"><p>did you pull the codes using the paper clip and flashing codes method? I have an airbag light staying on but it's not flashing or anything. I do have a different cluster in but it's crazy that I had an abs light on and when I swapped rear ends and put the brake lines from the other car on the differential and tied it to that junction box thing it came with, the abs light went out. When I was done with the rear supsension rebuild as well as the front and lowering it off the jackstands, I did because the car was so low in the front, the radiator support hit the front of the jack and it bent upward some. Ended up having to put another hood support, that rod that goes from bottom of rad support to up top and fixed my hood situation that happened after the fact. When I started the car, I had an airbag light. Those crash sensor things I guess that's what they are called the 2 things at the top of the radiator support and near the hood latch, they both look fine and undisturbed so not sure why the air bag light is on all of a sudden.....</p></blockquote><p></p>