Reply to thread

Message: <blockquote data-quote="o36" data-source="post: 1419744" data-attributes="member: 21756">The old deck and harness worked because i bridged the 12v constant and switched together effectively making the switched always on.Curiously however I was retesting all functions in the car and the windshield wipers aren't working which if I recall correctly is also on the switched circuit.As well, the driver side power window "one touch" feature doesn't work. The switch will roll the window down and up, but it has to be held for it to work.I've verified all brake lights, turn signal indicators and head light functions. Rear defrost works, HVAC controls all work. Trunk release button works, interior dome lights, horn works.Cruise control has been busted since I had the car. Dash illumination works as well as dimming. Power mirrors are also fine.Basically anything that relies on constant 12v power works, anything that relies on 12v switched doesn't work.I'm gonna have to go back and check fuses again. It occurs to me that this might not be a fuse problem, but maybe a relay problem...Sent from my iPhone using Tapatalk</blockquote>