Reply to thread

Message: <blockquote data-quote="Ferocious" data-source="post: 964698" data-attributes="member: 15502">Alot of people set their expectations to hitting 300HP n/a. Now i don't immediately want all that power, so i'm gonna aim for around 280rwhp on NPI heads.I need a bit of options and opinions on how to get there however.My car currently has the following:- Cold air intake- Off road x-pipe- Slp loudmouth 1's- Bosch 8mm wires & NGK spark plugsHere's what i plan on getting in the near future to reach my goal:- Ram air intake- PI intake w/aluminum crossover- 70mm tb and plenum combo- Underdrive pulleys- 4:10 gears (for the auto)- TuneRegarding cams:My main concern is what kind of cams I should go with. I was thinking about just getting the PI romeo cams, but what other available cams can i run to hit around 280rwhp?Keep in mind this is my only car & my daily driver. I need to be able to swap out the intake/cams in about a day and can't have the car not running for too long. I may be able to run a mild street cam, but i must run 87 fuel. I do not want to upgrade to 91 or 93.My question is this:Is there a mild street cam that i should be looking at? How close to 280 would the combination of parts place me at?</blockquote>