Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1548747" data-attributes="member: 11896"><p>then it is either a bad connection, or there are times the deck isn't supplying power, or a problem with the amp.  Next time it does not have power, try disconnecting the remote turn on wire at the amp, then jump the connection between the +12v constant and the remote and see if the amp turns on.  If the amp turns on then the amp is fine and there is no power on that wire for some reason.  Ensure you have a good connection up front and if so then you might just want to connect it to the red ignition wire.  The only thing that could cause is a slight turn on pop when you turn the deck on but nothing horrible</p></blockquote><p></p>