Reply to thread

Message: <blockquote data-quote="Pennywise2" data-source="post: 636613" data-attributes="member: 9021">I don't know what belt slippage will be like but,with a 3.0" pulley and a front mount intercooler you should see 12 psi. at the intake.You will be pushing the limits of your stock engine so,I'd subjest you make sure you get a custom dyno tune that is conservative.You will probably get less belt slippage with a 3.4" or 3.6" pulley instead and max out your stock longblock too.When you pulley down make sure you install a front mount intercooler at the same time.The more psi. you run the hotter the intake charge will be.You can also run methanol injection witch would aid with the cooling.</blockquote>